The Aquamaster monitors water levels in the main Aquarium.The unit comes with a Float switch is needed for normal top up use. By adding additional Floats, a Sump can be monitored for high or low water levels. A unique "fill and Float" response time, enables precise water filling and Feed pump control. The unit is fitted with an audible alarm and additional outlet socket i.e. dosing pump etc. Each socket has a maximum loading of 200 watts. Complete with I.E.C. plugs and optional cabinet mounting bracket.

Additional Float sensor needed for the Aquamaster

Programming is simple, via the large L.E.D display. Simply select the mode of operation and enter the pump(s) run and stop times.
Controls two pumps in four selectable modes of operation:

• Programmed Timed Sequential
• Random Timed Sequential
• Programmed Timed Combined
• Random Timed Combined

Each output socket has a maximum loading of 200 watts. Advanced micro-circuitry (zero voltage switching) avoids power surge on Start-up, thus decreasing wear on impellors. Timed Feed Mode from 1-60 Minutes. Complete with I.E.C. style plugs.CE Approved.

The Flagship product developed over six years ago and now up-dated for the serious Reef Hobbyist.
Designed for Aquariums of 48" and over. This unit has the same specification, as the two pump model, but an enhanced processor enables a tidal sequence(s) to be replicated over a twelve hour period.Four pumps can be enabled with a maximum of 800 watts.

Optional adjustable, light sensor for night time "calm"

The Aqua Alarm flood detector is a self contained, battery powered unit that provides an audible warning tone when moisture is detected at the end of it's wired probe. In stand-by mode battery life expectancy is approximately three years. The user checks the battery status periodically by pressing the red test button.

The Aqua-Alert will monitor sumps, overflow weirs, Top-up reservoirs, R/O vats etc. Also, any situation where a low water level will cause a pump to run dry. The user checks the battery status periodically by pressing the red test button.