Unique patented double reflector focuses 35% more heat and light into a tight beam.

Perfect for use with high heat basking reptiles, such as tropical and desert species.

Provides beneficial UVA rays which promote stuff like breeding, feeding and are beneficial to your reptile's psychological well-being.

Increases the overall ambient air temperature, necessary for the proper health of all reptiles and amphibians.

Creates the proper heat gradients necessary for thermoregulation.

REPTICARE® CERAMIC HEAT EMITTERS
What are they?
A porcelain heating device that screws into a standard porcelain incandescent socket

What do they do?
Heat emitters give off intense infrared heat, penetrating into the animals muscles, but emit no light! The perfect 24 hour heat source for all tropical and desert reptiles.

Why is the Zoo Med emitter best?
Our flat faced design (standard in the ceramic heat industry) is more efficient than conical designs in that it leaves less heat inside the emitter which will ultimately carbonize the element.

1. Our emitters last up to 5 years, which is twice as long as the competition! They keep on going, and going and going...
2. Water resistant! Perfect for high humidity terrariums!
3. Great heat source for a Zoo Med IguanArium and other wire or screen type enclosures.
4. Great for use with our Repti Temp Thermostat or a Rheostats!
5. The ONLY UL/CUL listed Ceramic Heat Emitter!

Perfect for use in horizontal facing light hoods

True blue glass (not painted or coated) for better heat transfer.

Full spectrum daylight bulb for heating reptile or amphibian terrariums.

Provides UVA, the wavelength that promotes a psychological well being and stimulates normal feeding behaviors in reptiles.

European quality for long burn life.

Ideal 24 hour heat source for all types of reptiles, amphibians, birds or small animals.

Very little visible light provided so as not to disturb your animal's sleep patterns.

Excellent for nocturnal viewing of all types of captive animals.

Spot reflector focuses more heat onto your reptile and minimizes nighttime glare.

True red glass (not painted or coated) for better heat transfer. Color will not fade or wear off.

Ideal 24 hour heat source for all types of reptiles, amphibians, birds or small animals.

Very little visible light provided so as not to disturb your animals sleeping patterns.

Perfect "night light" bulb for viewing the nocturnal behavior of your animals.

European quality for long burn life.

Available in a variety of sizes and come with a plug

Habistat Mat Stat

The Mat stat is a simple, economic thermostat, designed to be used with heat mats to a maximum of 100 watts.

Although heat mats can be used without thermostats, the cage temperature can fluctuate with the ambient temperature. Too hot outside and there is the likelihood of the vivarium overheating. With minimal additional cost it can be assured that overheating will not occur in hot weather.

One of the best selling thermostats, alongside the Temperature thermostat.

Habistat. Dimming thermostat.

Sophisticated Dimming thermostat, designed specifically
for controlling light bulbs. The Dimming thermostat is
one of the most accurate methods of temperature control
and whilst it is perfect for controlling light bulbs, it
can be used on almost any heaters. Unlike other Habistat
thermostats, it does require a minimum load of 40 watts,
but has a maximum capacity of 600 watts at 230 volts.

Habistat Cool Control

Cool Control™ is a thermostat that switches the power on when a set temperature is reached and off once the temperature has fallen below the set level. It is like an ordinary thermostat but only in reverse. It is commonly used to switch on cooling devices and thus prevent overheating. Fans like the HabiStat™ MiniFan™ are typical of the devices controlled. Where safety consciousness is called for, HabiStat’s Cool Control™ leads the field.

Great for controlling Cooling fans on Marine / Tropical aquariums

Habistat Mini Fan

The MiniFan™ is a small low voltage fan that comes with its own mains converting plug. It will move air either in or out to prevent stagnation or humidity imbalance. At last there is a suitable fan that is both safe and effective. Remove stuffiness and breeze through ventilation problems with this excellent little mover.

Can be used to help cool small aquariums

THESE ARE THE STANDARD CONTOL UNITS FOR T8 TUBES.THEY COME WITH LEADS AND A SWITCH.

As with the D3 reptile tube, this lamp has been designed to satisfy the U.V. requirements of reptiles which rely on skin synthesis of Vitamin D3 - in fact, at 7%, the UVB output is actually an increase on that produced by the linear tube at 5%.
It is a single ended lamp, with a standard E27 screw fitting, which can be used in a small vivarium, where installation of a tube may not be convenient, to provide complete illumination.

Alternatively, it can be used in a medium to large vivarium to create a basking area within the enclosure.

In either case, using the Arcadia Compact reflector, will maximise the light output.

This 23Watt energy saving lamp, actually has an output equivalent to a regular bulb of 120Watts, and does not require the use of a ballasted controller, as in the case of regular fluorescent tubes.

As with the D3 reptile tube, this lamp has been designed to satisfy the U.V. requirements of reptiles which rely on skin synthesis of Vitamin D3 - in fact, at 10%, the UVB.
It is a single ended lamp, with a standard E27 screw fitting, which can be used in a small vivarium, where installation of a tube may not be convenient, to provide complete illumination.

Alternatively, it can be used in a medium to large vivarium to create a basking area within the enclosure.

In either case, using the Arcadia Compact reflector, will maximise the light output.

This 23Watt energy saving lamp, actually has an output equivalent to a regular bulb of 120Watts, and does not require the use of a ballasted controller, as in the case of regular fluorescent tubes.

For use when mounting compact lamps into vivariums. It consists of a Ceramic E27 Lamp holder mounted onto a black metal bracket, which either screw fits onto a wooden surface, or can be attached to a glass inner surface using Arcadia self adhesive pads (available separately)
The flexible bracket can be angled to direct the lamp.
The power lead incorporates a manual switch, and is complete with fitted plug

A moulded plastic body, with a highly reflective inner surface.
The reflector surrounds the compact lamp, and focuses all of the lamp output in order to direct it where required - towards the bird or the reptiles, and as such maximising the performance of the lamp.
A Plastic grill over the lamp prevents animals from making contact.
Not for use with other forms of lamp

For monitoring terrarium humidity levels

Easy to read and install

For monitoring terrarium temperature levels

Easy to read and install

We would recommend to always use two of these, one at the cool end and one in

the hot end of the Vivarium / Terrarium